In Stock & Ready to Ship

Cisco D9854

  • Main Features
  • ●  Four L-band inputs
  • ●  New H/W with up to 180 Mbps throughput/bandwidth
  • ●  MPEGoIP Input with Redundancy (1 MPTS or 1 SPTS)
  • ●  MPEGoIP Output with Redundancy (1 MPTS or 16 SPTS)
  • ●  Supports Forward Error Correction (FEC) based on SMPTE 2022 for MPEGoIP input and Output
  • ●  DVB-S quaternary phase shift keying (QPSK) demodulation
  • ●  DVB-S2 QPSK and eight phase shift keying (8PSK) demodulation
  • ●  Cisco PowerVu® conditional access with Data Encryption Standard (DES) or DVB descrambling
  • ●  Support for Basic Interoperable Scrambling System (BISS) conditional access
  • ●  DVB-CI support for CAM-based conditional access
  • ●  4:2:0 HD MPEG-4 AVC and MPEG-2 1080i and 720p decoding
  • ●  4:2:0 SD MPEG-4 AVC and MPEG-2 decoding
  • ●  Aspect ratio conversion (4:3, 16:9, 14:9) with Active Format Descriptor (AFD) control for SD programs
  • ●  AFD support for down-conversion of HD programs with aspect ratio conversion
  • ●  User-configurable redundant ASI, SDI, or HD-SDI outputs
  • ●  SDI or HD-SDI video output with embedded audio
  • ●  Closed captioning support for EIA-608 and EIA-708
  • ●  MPEG and Dolby Digital audio decoding
  • ●  DVB or Imitext subtitling
  • ●  Four audio outputs providing either two stereo pairs or four mono channels of balanced, audio, each with the ability to use part of the output for applications such as second audio program (SAP), cue tones, etc.
  • ●  Utility data up to 38.4 kbps using RS-232
  • ●  Uplink addressable decoder output control, including vertical blanking interval (VBI) data, audio routing, DPI, and ASI output)
  • ●  Fingerprint trigger
  • ●  Field upgradeable software and security
  • ●  Simple Network Management Protocol (SNMP) for setup, control, and monitoring
  • ●  Front panel liquid crystal display (LCD) for control and monitoring
  • ●  Web browser interface for easy setup, control, and monitoring
  • ●  DVB-VBI and SCTE-127 support
  • ●  CAM Interface software
  • ●  Dual-tone multifrequent (DTMF) cue tone and cue trigger outputs for advertisement insertion
  • ●  Digital program mapping providing uplink control for service replacements in blackout areas
  • ●  Cisco Live Event Controller support
  • ●  On Screen Display support on baseband output.
  • ●  Satellite Disaster Recovery support with Cisco PowerVu Network Center uplink control
    (Release 12.5 or later)

Greenlee 920XC-30P OTDR

  • The 920XC-30P measures optical fiber at 1310nm, 1490nm, and 1550nm 
  •  Basic applications: 
  • Measure the length of optical fiber and cable. 
  • Measure the distance between two points on optical fiber and cable. 
  • Locate faults and ruptures of optical fiber and cable. • Display distribution curve of optical fiber and cable loss. 
  • Measure attenuation coefficient of optical fiber and cable. 
  • Measure loss between two points on optical fiber and cable. 
  • Measure loss of tie-ins. 
  • Measure reflection of reflection events of optical fiber and cable. 
  • The 920XC-30F can measure live optical fibers at 1625 nm. 

Arris DSR-6000

  • The DSR-600 Integrated Receiver/Transcoder is Motorola’s next generation commercial satellite receiver/transcoder, capable of transcoding one MPEG-4 HD service and outputting MPEG-2 HD and/or SD service (depending on authorization from uplink operator). Packaged in a one RU chassis, the DSR-6000 comes equipped with industry standard output interfaces such as Gig-E and ASI that enable seamless connections to headend equipment. With advanced modulation support, the DSR-6000 supports DVB-S2 8PSK. 

More Equipment Coming Soon

If you do not see what you are looking for please contact us as we may have what you need in stock at our warehouse.